Remote Control Automatic Barrier Gates , Straight Boom Traffic Barrier Gates in 3m / 5m / 6m WST-1171 manufacturer from China Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

Remote Control Automatic Barrier Gates , Straight Boom Traffic Barrier Gates in 3m / 5m / 6m

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: WST-1171

Remote Control for Automatic Barrier Gates with Straight Boom Traffic Barrier Gates in 3m , 5m , 6m Quick Detail:

Remote Control for Automatic Barrier Gates with Straight Boom Traffic Barrier Gates in 3m , 5m , 6m

Quick Detail:

Name: Automatic barrier gate
Beam length: <=6m
Opening (Closing) time: 1s, 3s, 6s
Center height: 0.83m
Electric working temperature: -20 degrees to +75 degrees
Rated voltage: AC 220V (10%) 50Hz/60Hz, 110V (10%) 50Hz/60Hz
Rated power: 120W
Relative humidity: <=90%
Remote control distance: >=30m

Functions & Features

1. By-security. The barrier gate will automatically go back when meet obstacles during closing.
2. AC motor is more powerful and no maintenance.
3. Barrier Beam/arm can be chosen from 3 meters to 6 meters, and barrier gate
4. closing time is also arranged from 1 second to 6 seconds.
5. The barrier gate can be both right-installed and left-installed.
6. All the operation process is soft without any noise and shaking.
7. Infrared photocell interface, Loop detector interface and IC system
8. interface are reserved for the other functions.
9. Green light and red light are used inside for indication the position of the beam.

Model Selection and Differences

Model	Boom Shape	Max Boom Length	Speed
WST1171	Straight boom	6m	6 seconds
WST1172	Straight boom	4.5m	3 seconds
WST11721	90 degree, Articulated boom	5m	6 seconds
WST11722	90 degree, Articulated boom	3m	3 seconds
WST11761	180 degree, Articulated boom	5m	6 seconds
WST11762	180 degree, Articulated boom	3m	3 seconds

Specifications

Model	WST1171
Working Temperature	-40+75
Voltage	220V±10%, 110V±10%, 50/60HZ
Rated power	80W
Relative humidity	≤90%
Remote control distance	≥30m
Net weight	48kgs
Speed	1S,1.8S,3S, 6S
Max boom length	6 meters
Motor Rotational speed	1400rmp
Protection Degree	IP44

With WONSUN, your job gets easier.
Because we don’t just create “good” products, that work pretty well.Our thinking is beyond the short-term.We are conceiving, designing and creating high-tech solutions that are as advanced and effective as they are reliable and long-lasting.
Because we want to provide tools and services that truly are innovative,that will improve your performance and enhance your skills;and that will make your business easier, increasing its profitability.
Because our focus is on Quality with a capital Q.We just won’t settle for less.

Communication with customers

1) Q: Connected power and press open/close button but electronic barrier gate no action?

A	Reason	Solution
1	Fuse blown	Check fuse and power in controller
2	Battery of remote control powered off	Change a new one
3	External protection circuit break or at protecting status	Open the barrier door and click OPEN/CLOSE button on control box
4	Same frequency interference	Check photocell and loop detector

2) Q:Connected power and press open/close button, electronic barrier gate will move but even when it is at right position, the motor still running and not stop?

A	Reason	Solution
1	Limit switch	Adjust the horizontal/vertical limit switch to correct position
2	Main controller failure	Change a new one

3) Q: Motor running but electronic barrier gate arm no action?

A	Reason	Solution
1	Barrier arm at 45° position where is hard to move	Unlock clutch and manually rotate arm to horizontal or vertical position then try again
2	Tension of balancing spring not suitable	Adjust spring exactly
3	Low working voltage	Check the voltage and power

4) Q: When opening/closing,electronic barrier gate arm cannot reach right position (90° vertical & 180° horizontal)?

A.	Reason	Solution
1	Length adjustment of connecting rod not correct	Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at 180° horizontal position if master rod and slave one are in the same straight line
2	Nuts on the limit switch loose	Tighten the nuts when arm at 90° vertical and 180° horizontal position